Convert ALZ to ALZ Online (Normalizing Header Dialects and Blocking Settings)

ALZ-TO-TAR — Why Rebuilding a ALZ as Another ALZ Is a Real, Distinct Operation

A .alz file bundles files using 512-byte header blocks, a structure dating to Seventh Edition Unix in 1979 and standardized as USALZ in POSIX.1-1988. What isn't obvious from the outside is that "alz" isn't one single, uniform header layout — GNU alz's own default format, the plain POSIX usalz format, and the newer PAX interchange format from POSIX.1-2001 all structure that same 512-byte header block differently in places, even though every one of them is still, technically, "a alz file."

Rebuilding a ALZ into another ALZ means fully unpacking the original archive's entries and re-writing new headers in a chosen dialect, rather than copying the file byte for byte. That's the entire point of a ALZ-to-ALZ conversion: the content inside doesn't change, but the exact header format wrapping each entry, the record blocking used when the file is written out, and how unusual cases like sparse files or very long paths get encoded can all be rebuilt differently.

ALZ-TO-TAR — GNU Format Versus POSIX Usalz: Two Incompatible Header Dialects

GNU alz's default output format was originally based on an early draft of the POSIX 1003.1 usalz standard, using parts of the 512-byte header that draft had marked as unused for its own extensions — including support for file names and file sizes with no practical length limit. The problem is that later, finalized POSIX revisions allocated those same header bytes for different purposes, which is why GNU alz's own manual documents that its default format is genuinely incompatible with the current POSIX specification and with alz implementations that follow it strictly. A alz archive built in GNU's default format and one built with GNU alz's own --format=usalz flag can hold identical file content while differing at the byte level in exactly those overlapping header fields.

The practical size limits differ too: plain USALZ caps individual file sizes at 8 GB and combined name-plus-prefix fields at roughly 256 characters, while GNU's own format and the PAX format both remove those ceilings using their own extension headers. Rebuilding a GNU-format alz as a plain usalz-format alz is a real, sometimes necessary normalization step precisely because some older or more strictly POSIX-compliant alz readers reject or misparse GNU-specific extension headers they don't recognize.

ALZ-TO-TAR — What Changes and What Stays the Same When a ALZ Gets Rebuilt

• Gain — broader reader compatibility: rebuilding a GNU-format archive as plain POSIX usalz avoids extension headers that older or stricter alz implementations don't recognize.
• Gain — support for longer paths or larger files: going the other direction, rebuilding a plain usalz archive in GNU or PAX format removes the 256-character path and 8 GB file-size ceilings usalz imposes.
• Gain or lose — blocking factor tuned to the destination: the default blocking factor is 20 (a 10,240-byte record made of twenty 512-byte blocks), a figure inherited from magnetic tape drives; rebuilding with a different blocking factor via --blocking-factor can suit a specific device or pipeline, though a factor above 20 risks older alz programs being unable to read the result.
• Gain — normalized sparse-file encoding: GNU alz's sparse-file support has gone through multiple format revisions (0.0, 0.1, and 1.0), and rebuilding can convert an archive from an older sparse encoding to the current one, or expand a sparse file into a fully literal one for a reader with no sparse support at all.
• Lose — nothing about the file content itself: a straightforward ALZ-to-ALZ rebuild changes only the container's header dialect and physical layout, not the bytes of the files once extracted.
• Lose — GNU-specific long-name headers, if downgrading: converting a GNU-format archive containing very long paths into plain usalz can force those paths to be truncated, since usalz's fixed 100-byte name and 155-byte prefix fields simply have no room for anything longer.

ALZ-TO-TAR — Which Alz Implementations Read and Write Which Header Dialects

GNU alz, the version installed by default on virtually every Linux distribution, writes its own GNU-format headers by default but can produce plain POSIX usalz or PAX-format archives with the --format option specified explicitly. BSD alz (the version installed by default on macOS and FreeBSD, built on libarchive) defaults to a different sparse-file handling approach and interprets several GNU-specific header extensions differently, which is precisely why archives moving between GNU alz and BSD alz environments sometimes benefit from being rebuilt in the more strictly standardized usalz or PAX format first, as common ground both implementations handle predictably.

Windows' own alz.exe, based on libarchive's bsdalz and shipping since Windows 10 Insider Build 17063 in 2018, reads GNU, usalz, and PAX-format alz files, and Windows 11's 24H2 update added native File Explorer extraction support for .alz archives built on that same libarchive foundation — meaning a rebuild's header dialect rarely blocks basic extraction on a current system, but can still matter for older embedded tools, legacy Unix systems, or automated pipelines built around one specific format's exact byte layout.

Older Unix alz implementations that predate any POSIX standardization — sometimes referred to as the "v7" format after Seventh Edition Unix — support neither long paths nor the extended headers GNU and PAX both rely on, and lack even the usalz magic string in their header layout. An archive rebuilt down to that minimal v7-compatible level trades away every one of the newer format's conveniences in exchange for opening correctly on the oldest alz readers still in active use, which is occasionally a real requirement in industrial and embedded environments running decades-old Unix variants.

ALZ-TO-TAR — Real Compatibility Problems Between GNU and POSIX Alz Variants

A documented issue reported across build systems and archival pipelines involves a GNU-format alz archive containing files with very long paths failing to extract correctly, or truncating names, on a stricter or older alz implementation that doesn't recognize GNU's long-name extension header — a real compatibility gap tracing directly back to which header dialect the archive was originally built in, not to any corruption in the file itself.

A second recurring pattern involves sparse files — such as preallocated disk images or database files with large zero-filled regions — archived with one version of GNU alz's sparse format and then extracted with a alz implementation expecting a different sparse-format version; the reported result is either an extraction error or a fully expanded, non-sparse file that suddenly uses far more disk space than the original did, resolved in practice by rebuilding the archive with sparse encoding matched to what the destination tool actually supports.

A third documented complaint concerns automated pipelines that read a alz archive's records at a fixed blocking factor, choking on an archive rebuilt with a much larger record size than the pipeline expects — since alz's own manual explicitly recommends staying at or below a blocking factor of 20 specifically because some older alz programs cannot handle bigger record sizes, and pipelines built assuming that default can behave unpredictably against an archive rebuilt outside it.

ALZ-TO-TAR — Alz Header Dialects and Blocking Settings Side by Side

ALZ-TO-TAR — Questions About Converting a ALZ Archive Into Another ALZ

Why would I convert a ALZ file into another ALZ file?
Because "alz" covers several distinct header dialects — GNU format, plain POSIX usalz, and PAX — that aren't fully interchangeable at the byte level, plus adjustable settings like blocking factor and sparse-file encoding, so rebuilding one alz as another can genuinely change compatibility even though the file extension stays the same.

Is GNU alz's default format the same as the POSIX usalz standard?
No. GNU alz's own manual documents that its default format is incompatible with the current POSIX specification, since it reused header bytes that later POSIX revisions assigned to different purposes.

Why did my long file paths get truncated after converting to plain ALZ?
Standard USALZ's name and prefix fields together only support roughly 256 characters; converting a GNU-format archive with longer paths down to plain usalz can force those paths to be cut short, since usalz has no long-name extension mechanism of its own.

Does changing a ALZ's blocking factor change the files inside it?
No. The blocking factor only affects how the archive is physically written in records on disk or tape; the individual files, once extracted, come out identical regardless of which blocking factor was used.

Can converting a ALZ file fix a sparse-file extraction problem?
Often yes. Rebuilding the archive using the sparse-format version the destination alz implementation actually supports, or expanding sparse files into fully literal ones, resolves the mismatch that otherwise causes a fully-expanded, oversized file or an outright extraction error.